Will pressure washing damage my wood fence?
Not when it’s done with calibrated pressure. High-PSI blasting can raise the wood grain and splinter older boards. We use appropriate pressure for the wood condition and let chemistry do the heavy lifting.
Fence Restoration in Rockwall County
Wood and composite fencing. Mildew, algae, and weathered grey come off with appropriate pressure and chemistry, leaving the wood ready for stain or seal.
What Fence Cleaning Does
Restore Before You Replace
A wood fence that looks grey and weathered usually doesn’t need replacing — it needs cleaning. Mildew, algae, tannins, and UV graying are surface problems. The right chemistry and calibrated pressure strips all of it and brings the natural wood color back.
After cleaning, the fence is ready for stain or sealant if that’s the next step. We don’t apply stain or sealant, but we leave the surface clean and open-grained so a coat of stain takes evenly. Most homeowners are surprised by how much better the fence looks before any finishing work.
What We Handle
Fence Materials and Conditions
-
Wood Privacy Fencing
Cedar, pine, and treated lumber. Cleaning removes mildew, algae, and grey weathering. Leaves the grain open for stain or sealant.
-
Composite Fencing
Lower pressure than wood, chemistry-driven cleaning. Composite doesn't absorb stain, so the goal is a clean surface and nothing more.
-
Picket Fencing
Attention to detail between slats and at the post caps. Mildew likes the shadowed areas; we get into them.
-
Heavily Weathered Fences
Significant greying and mildew buildup may need a longer dwell time and a second pass. We tell you upfront what to expect.
Before You Stain
A Clean Surface Is the Foundation
Stain applied over a dirty, grey fence doesn’t look right and doesn’t last. Cleaning first is the step that determines whether the stain job turns out well or peels in a season.
We leave the fence clean, dry, and ready. Most stain contractors want to see the fence at least 48 hours after cleaning before they apply. We’ll tell you that timeline when we finish so you can coordinate the next step.
Testimonials
What Clients Are Saying
“The fence looked like it was replaced but it was just cleaned. Years of grey weathering gone in one afternoon.”
“Cleaned the fence before we stained it. The stain went on perfectly and the result was amazing. Worth every penny.”
Service Area
Local Means Actually Local
Based in Fate, Texas, serving Rockwall County and the east-of-Dallas corridor:
FAQ
Common Questions
How long after cleaning can I stain the fence?
Most stain manufacturers recommend waiting 48 to 72 hours for the wood to dry before applying. We’ll let you know the condition of the surface when we finish so you can time the stain application.
Do you apply stain or sealant after cleaning?
No. We focus on the cleaning. The surface will be ready for stain or sealant once it dries. We’re happy to refer you to a stain contractor if you need one.
Can you clean just part of a fence?
Yes, but the cleaned sections will look noticeably better than the uncleaned sections. We’ll usually suggest cleaning the full run for a consistent result.